I am going to N.C. with a few friends to part out a car. If you need anything from this list, feel free to post up. I will be going with a pick up truck and parts can be brought back instead of shipped with buyer helping with the expense of gas based on size and quantity of parts if you are local to me. All top of the line parts in good condition. If you feel a price for something is too high, submit an offer.
Engine: $5000.00, Complete motor Intake to Pan, 10,000 miles
You will need Injectors, Water pump, TB
383 LT4 9.0:1
4 Bolt mains w/ studs
Forged Eagle Crank 3.75"
Forged Eagle Rods 5.7"
SRP pistons
Oiling:
Melling HV oil pump, Canton 7qt. Pan
Or, can be broken down as follows....
Heads: $1700
LT4 castings worked over by Lloyd Elliot
2.08/1.60 Valves (Heads flow more than the AFR 195"s)
Cam:
224/236 Blower Cam
Intake: $500
LT4 reworked by Lloyd Elliot
Comp Cams Pro Mag 1.6 rockers $100
Dynojet Wideband Commander $400
ASM 58MM TB $500
CSI Electric Water Pump $150
MSD 50# injectors $100 sale pending
Aeromotive Adj. FPR $50
AlkyControl Methanol Kit $250 SOLD
Mallory Hy-fire 685 ignition box and MSD Blaster coil $200
SJM line lock w/ lines $75
ATI procharger P-1SC: $3000.00
includes all piping, FMIC, everything to install
or
$2250 for procharger with SDCE tensionerpulleys and belt
$750 for FMIC, piping, silicone and t-bolt clamps
T56 built by Bobby Brinkley $1500.00
includes bellhousing
Borla Catback $400.00
includes no plates
Pacesetter LT's w/ Y pipe w/ manual cutouts $200
Spohn DBL adj. Lower control Arms $100 SOLD
Spohn Adj. Chassis mount Tq Arm $225 SOLD
AJE Racing K-member $300
AJE Racing Adj. Lower A-arms $250
QA1 front shocks w/ 300# springs $400 SOLD
95 Z28 Roller: $2500 with stock suspension
includes all suspension parts listed above, 10 bolt, Sub frame connectors, etc..
You will need a hood and spoiler
Here are pictures of the car, if additional pictures of individual parts are needed, PM me and I will get them for you.

__________________


Jim
President of N.I.F.B.A.
Live in the Chicagoland area, want to be in a Fbody car club?
Click here to Join NIFBA

Is the trans still for sale, if so are you willing to throw in the hydralics ( master & slave) for the price? Also I'm not familiar with Bob Brinkley so what was done to the trans to beef it up? Email me at aero.coupe@hotmail.com thanks, by the way I'm located in Maryland so I could meet you somewhere in Va or NC.

Hey just curious as to if the headers are still available.. im very interested and have cash.. let me know thanks..

Headers are sold.

__________________


Jim
President of N.I.F.B.A.
Live in the Chicagoland area, want to be in a Fbody car club?
Click here to Join NIFBA