Here's some pics of my ride. I did probably 80% of the work to it.. I'll start with how it looked 2 years ago when I bought it up to today.. Car had 9,024 miles on it when I bought it.. Mod list below pics..
This is when I first bought it

no idea why it had a WS7 badge on it
Here's what it looks like now.
Street trim ran a best of
12.63@111 NA on 18' rims, never used the nitrous system that was in the car when I bought it
Drag race trim, haven't had a chance to run it yet in this configuration, track doesn't open until 14 May. Shooting for low 11's, if I'm lucky a 10.99..
Mod list:
Factory Options:
T-Tops, leather interior, Power drivers seat w/lumbar, A/C, PW, PDL, remote entry, CC, Traction Control(Always turned OFF), Power Antenna, Tilt wheel
Exterior Modifications:
American Flag Phoenix and PONTIAC letters on front. Trans Am Door emblems(Changed out for Black), PONTIAC rear letters Black, Custom Tail panel painted Silver metallic chameleon, all side trim removed.. Carbon Fiber WS6 badge(Changed out the red one) Window tint, Mirrors on the underside of Hood, Chrome fuse box and PCM cover, WS6 mirror on A/C condensor, MBA billet caps, dipstick and Master cylinder cover, polished valve covers, Coil packs relocated under cowl, side trim removed
Interior Modifications:
-Autometer lean/rich gauge
-Auto Meter Digital tach w/shiftlight
Performance:
-Nitro Dave 78 MM Plate system w/bottle heater and dual digital window switch
-Ed wright power tuning/Bullseye PCU
-Extreme comp cam
-Titanium valves, springs and pushrods
- Yella Terra Roller Rockers
-30Lb injectors
-Walbro 255 inline pump
-MTI Ported throttle body
- Carbon Fiber lid
-ASP pulley
-10.4 mm plug wires
-SLP high flow radiator
-160 degree thermostat
-Mallbro 255 inline fuel pump
-SLP long tube headers ceramic coated
-3" ORY
-Mufflex 4” exhaust
-DMH Low Profile Dual electric exhaust cutouts
Suspension/Chassis:
-Nitto 555 extreme tires 285/35ZR18 front
-Nitto 555 Extreme Drag Radials 285/35ZR18(currently bald..lol)
-18” Budnik rims
-15" Summitt Star rims for the track
-Q.A.1 springs
-Q.A.1-12 way adjustable shocks Rear
-Q.A.1 -12 way adjustable Shocks revalved as an "R" series on the front
-SLP subframe connectors
-Adjustable panhard rod
-Upper panhard rod
-BMR lower control arm relocation brackets
-BMR Chrome moly tubular adjustable lower control arms
-Spohn Tunnel mount adjustable torque arm w/safety loop
Drivetrain:
-TCI built transmission
-B&M large tranny pan
-Vigilante 3200 RPM stall converter
-Carbon fiber driveshaft
-3:73 gears with rearend girdle
Electronics:
-Alpine cd player
-MB quart comp mids and highs
-Eclipse pro sub woofer
-Xtant amp
-MB Quart crossovers
-Python Alarm