So in December I'll be repainting my Bird. Trying to decide if I should keep it the same color and have a black pinstripe the same size as my current stripes. The other color I really dig is Medium Quasar Blue. They stopped using it in 97 on F-bodies and I honestly can't see why. If I go with that then I'm thinking get another silver pinstripe down the side like what I currently have.

MQB:

__________________

"What if I told you insane was working fifty hours a week in some office for fifty years at the end of which they tell you to piss off; ending up in some retirement village hoping to die before suffering the indignity of trying to make it to the toilet on time? Wouldn't you consider that to be insane?"
-Steve Buscemi as Garland Greene in Con Air
www.fquick.com/firebirdphil

I've always liked that old blue, I vote change to blue if you're repainting it anyways.

__________________
Andy
▌1966 Oldsmobile Cutlass F-85 Deluxe
455cid F2 Block | Edelbrock Performer RPM Heads & ARP Bolt Kit | Mondello JM 22-25-10 Cam - 274/280 .512/.523 | Harland Sharp 1.6 Ratio Full Roller Rockers | Edelbrock Modified Performer Intake
▌1995 Chevy Camaro - Slow
My Cars are USDM, it's like JDM in Japan; Crazy Eh?

Got a Myspace? Friend our F-Body Online Account

Kinda what I was thinking. A friend though reccomended going with a more metallic version of my current color also, but I think it'd either look really awesome or just too over the top. With the blue I oculd add an exterior mod and still not push it overt he top.

__________________

"What if I told you insane was working fifty hours a week in some office for fifty years at the end of which they tell you to piss off; ending up in some retirement village hoping to die before suffering the indignity of trying to make it to the toilet on time? Wouldn't you consider that to be insane?"
-Steve Buscemi as Garland Greene in Con Air
www.fquick.com/firebirdphil

I voted for the blue as well!! Would look very good.

__________________

MQB is one of my all time favorite colors.....go for it.

__________________
2001 Z/28 6speed. TSP 231/237 598/595 112 cam, PRC .660 lift valve springs, titanium retainers, TSP 7.4 hardened push rods, Lid w/ Amsoil filter, Longtube headers, TSP true duels, richmond 4.10 gears, SLP maf, LS2 timing chain and gear set, Clevite rod and main bearings, ARP rod bolts, Power bond 25% UD pulley, Custom tune by RPM performance, BMR subframes, BMR LCA's, Edelbrock TQ arm, BMR panhard bar,315/35/17 MT ET streets on black ZR1's... 395 rwhp 381 rwtq

Well its 6-0 So far in favor of blue. Might as well get to it

__________________
Andy
▌1966 Oldsmobile Cutlass F-85 Deluxe
455cid F2 Block | Edelbrock Performer RPM Heads & ARP Bolt Kit | Mondello JM 22-25-10 Cam - 274/280 .512/.523 | Harland Sharp 1.6 Ratio Full Roller Rockers | Edelbrock Modified Performer Intake
▌1995 Chevy Camaro - Slow
My Cars are USDM, it's like JDM in Japan; Crazy Eh?

Got a Myspace? Friend our F-Body Online Account

Yeah my mind has been made, MQB it is. Thanks for the help guys. After the paint job SLP CAI and SS Cragars (or knockoffs ) shall be next.

__________________

"What if I told you insane was working fifty hours a week in some office for fifty years at the end of which they tell you to piss off; ending up in some retirement village hoping to die before suffering the indignity of trying to make it to the toilet on time? Wouldn't you consider that to be insane?"
-Steve Buscemi as Garland Greene in Con Air
www.fquick.com/firebirdphil

I like the blue better, but I think i'd like to have more metallic in it. If I personally repainted my car, I have no doubt in my mind what color it would be, SOM (Sunset Orange Metallic) is by far my favorite on an Fbody.

__________________

If I had to repaint mine, I would have to choose that Electron blue from the C5 Zo6's, that was a sweet ass color IMO.

__________________
2001 Z/28 6speed. TSP 231/237 598/595 112 cam, PRC .660 lift valve springs, titanium retainers, TSP 7.4 hardened push rods, Lid w/ Amsoil filter, Longtube headers, TSP true duels, richmond 4.10 gears, SLP maf, LS2 timing chain and gear set, Clevite rod and main bearings, ARP rod bolts, Power bond 25% UD pulley, Custom tune by RPM performance, BMR subframes, BMR LCA's, Edelbrock TQ arm, BMR panhard bar,315/35/17 MT ET streets on black ZR1's... 395 rwhp 381 rwtq

Well if you do go blue, you better have them paint the door sills and the underside of the hood.

__________________


23:23] blkIROC355: sometimes when i pee i make that sound the light sabers make
[23:23] SpecialK LS1: lmao
[23:23] blkIROC355: and play with the stream
[23:23] SpecialK LS1: that's just wrong