Paypal is acting funny for me, is there an address I can mail to? PM me if you don't want to post it.

__________________

"What if I told you insane was working fifty hours a week in some office for fifty years at the end of which they tell you to piss off; ending up in some retirement village hoping to die before suffering the indignity of trying to make it to the toilet on time? Wouldn't you consider that to be insane?"
-Steve Buscemi as Garland Greene in Con Air
www.fquick.com/firebirdphil

OK, got some updates! Got the gauges mocked up in there. The white circle in the middle I was going to use for another gauge, but I decided to use that spot for a few LEDs for turn signals and the like. I'm gonna mount the nitrous pressure gauge right into the dash somewhere. I have an idea, but not set yet. I have since painted the bezel semigloss black, so we'll see what I decide once I get the gauges in and in the car.



Also had some rust and some spots that I wanted to remove to smooth out the firewall. We cut out a small section of the firewall and I'm going to weld in a piece of metal there and smooth it over. I'm going to relocate the wiring bulkhead to under the fender to keep the clutter to a minimum in the engine bay.

Temporary tacked thin metal.


And I had good help, too. My good friend Russ dropped by and had some fun with the angle grinder.


My best friend also dropped by and sandblasted some parts for me, so last night I powdercoated them in semigloss black. These parts were ROUGH, so they came out pretty good for what I had to start with!

__________________
1979 Bandit TA - 400/4-spd
1998 Trans Am - LS1/A4

PatriotDream.org - Making a soldier's dream come true

I get multiple requests for what parts I still need every week, so here it is for those of you who might be interested!

Monetary donations always welcomed!
Trunk lid
Rear spoiler
Front spoiler
rear view mirrors
Bumpers
RS headlight parts
Hidden wiper motor
Entire windshield wiper setup
Rear interior panels
All the little trim pieces from the dash
LS1 MAF sensor
LS1 shorty headers
LS1 T56 bellhousing
LS1 T56 4th gear/input shaft
LS1 T56 6th gear
LS1 front plate
LS1 front and rear plates
Stereo system
2nd gen TA or Z28 rear axle, posi preferred!
New windshield and rear glass

And probably a ton of other stuff I'm forgetting. I'll update the post as I remember stuff. Feel free to PM me, post up, or send me an email to webmaster@patriotdream.org

Thanks!

__________________
1979 Bandit TA - 400/4-spd
1998 Trans Am - LS1/A4

PatriotDream.org - Making a soldier's dream come true

Looking good Brian.

A guy on the Z28.com board donated the entire stereo system, so mark that off!

__________________
1979 Bandit TA - 400/4-spd
1998 Trans Am - LS1/A4

PatriotDream.org - Making a soldier's dream come true

Very awesome!

__________________


1990 Pontiac Firebird Formula 350

I must say, it is looking good. Keep it up

__________________


Ron
2001 Pontiac Firebird
3.8L V6 Vroom Vroom
Just purchased, so no mods yet

Got the gauge bezel all put together with the Autometer Ultra-lite II gauges and three LEDs donated by TheLEDLight.com. They are in a Covan's panel donated by Queen City Speed.



Also got in the Classic update complete wiring harness donated by American Auto Wire!


I'm going to have a BIG update this weekend, so stay tuned! I also REALLY need any help we can get. We're running out of time and money fast with a lot left to do.

__________________
1979 Bandit TA - 400/4-spd
1998 Trans Am - LS1/A4

PatriotDream.org - Making a soldier's dream come true

Its looking good. I"m going to have to drive to Raleigh and see it for myself... lol

__________________


Ron
2001 Pontiac Firebird
3.8L V6 Vroom Vroom
Just purchased, so no mods yet

looks good! Got my sticker the other day. When I get my car goin and put the sticker on it Ill take a pic for ya!!!! lol

__________________
http://www.txchaos.com/forums/index.php