i just got a set of kyb fully adjustable bound and rebound agx shocks part # 743019 for 84.97$ each after price matching my stores price to summits price (advance auto parts) and i want to know what i should set them up as for street driving and at the track

i was told like a 90/10 (bound/rebound) front so it (front end stays up) and and 70/30 for the rear

and street driving like 30/70 front and 40/60 rear

am i even close to what im looking for

__________________
94' Z28: #07-503-8 COMP CAMS CAMSHAFT. HOOKER HEADERS & CROSSFLOW NO CAT,11:1 COMPR MICKEY THOMSON E/T DRAGS, 370HP/410FTLBS

I think there was something on this over at ls1tech, but i cant remember. Ill do a quick search.

__________________
2000 Firebird 3.8L V6

Pacesetter headers & y-pipe | cacto 3in CAT | slp factory dual exhaust (off a SS) | whisper lid w/ K&N filter | aluminum DS | 1LE 32mm front sway bar | 3.42 w/ lsd

thnaks!

__________________
94' Z28: #07-503-8 COMP CAMS CAMSHAFT. HOOKER HEADERS & CROSSFLOW NO CAT,11:1 COMPR MICKEY THOMSON E/T DRAGS, 370HP/410FTLBS

KYB AGX Guys, question about stiffness. - LS1TECH

they say they're settings are 6 or 8, not 70/90 like you. Im not sure if that means the same thing, but that thread might help you out.

__________________
2000 Firebird 3.8L V6

Pacesetter headers & y-pipe | cacto 3in CAT | slp factory dual exhaust (off a SS) | whisper lid w/ K&N filter | aluminum DS | 1LE 32mm front sway bar | 3.42 w/ lsd