Heres a guide to install LED Lights in your dash. Before that is explained, we’ll take you through getting the dash off to get at the lights. We all know that at times it can be frustrating to try to figure out how to disassemble a dash. Heres a quick and easy guide for it for 1993-1996 Camaros (Firebirds should be similar, but not 100% sure).

Open the glove box and there will be 3 bolts. 9/32


Next, Lower Dash drivers side 2 bolts (9/32) and 2 Phillips screws.

After the lower dash there will be 2 more (9/32) hold the radio trim.

After all that’s removed you can start on the bezel gauge cover, there are 2 (9/32) on each and 2 on top under the dash pad.

Should look like this now

there are 4 (9/32) hold the gauges in. 2 on each side

Now for the Good part, getting the LEDs ready and inserted.

1 NEOx-R 3mm in head light switch

Gauges lights have to be modified a bit to work right

Wrap the leads around the connectors

Now install the bulbs. If they don’t light up turn them around.

7 blue WLED-x-x LED bulb 120deg

1 NEOx-R 3mm blue

For HVAC use: 74-x Wedge Base LED bulb
For Door Trim use: 74-xHP Wedge Base LED Bulb

Related posts:

1. Fix Cracked Dash in 4th Gen How to Fix your Cracked Dashpad to look brand new....
2. Replace Lights behind your HVAC controls This is my write up on how to replace the...
3. How to Change Center Console (Auto)Shifter Light Common issue as cars get older are the interior lights...
4. Full List of Options for 2010 Camaro leaked Hemmings Blog scored some internet gold with the find...
5. V6 Factory Packages The question about specific packages with 1993-2002 Camaros and Firebirds...